Featured StoriesRoll Marking

Four-Sided Bar Stock Roll Marker Helps Fitting Manufacturer

New CMT Four-Sided, Bar Stock

Roll Marking Machine Helps Fitting Manufacturer

Significantly Reduce Marking Costs

 

Columbia Marking Tools has designed and built a new Model 2640 bar stock roll marking machine for a leading manufacturer of hose and pipe fittings. The unique new machine simultaneously imprints continuous identification information on four sides of hexagonal bar stock, eliminating the need for additional costly, labor-intensive, secondary marking operations. With additional marking and support tooling, the Model 2640 machine can also mark square and round bar stock. This is particularly beneficial to fitting manufacturers who typically have tremendous variations in part sizes and types.

Fitting sizes, types, lot numbers, part numbers, company logos or trademarks, and even date codes can be roll marked on three or four sides of hexagonal stock.

The Model 2640, stand-alone, continuous roll marking machine consists of a heavy-duty machine tool base, two independent marking pressure rams, adjustable fixture and guide rolls with up to four marking rolls.

The marking rolls are driven by a 2 hp(1.49kW) DC electric motor through a variable speed drive that adjusts the bar stock feed rate from 70 to 210 fpm(21-64M/min). Bars from 3 to 20 feet (0.91-6.1M) long are manually fed into the machine. The driven marking rollers continuously mark the bar stock and drive the bars through the machine.

Brass stainless steel, alloy and CRS bar stock can be marked equally well in sizes from 3/8 to 2-1/2 inches (9.5 to 63.5 mm). Conveniently located hand wheels at the top of the machine provide easy adjustments on the imprint pressure and bar stock size. The motor control has fuses, a transformer and requires 220/240 VAC power.

CMT roll marking machines are designed to mark round, flat and irregular shaped parts quickly and quietly. Roll marking produces uniform impressions and uses low marking pressures compared to press applications.

Columbia Marking Tools is a leading designer and manufacturer of metal and plastic marking equipment including stamps, roll marking dies, roll marking and impact marking machines, fully programmable pulsed fiber diode laser, peen/scribe marking and UID/2D Square Dot® machines, numbering heads and special marking and vision inspection machines.

Columbia Marking Tools has designed and built a new Model 2640 bar stock roll marking machine for a leading manufacturer of hose and pipe fittings. The unique new machine simultaneously imprints continuous identification information on four sides of hexagonal bar stock, eliminating the need for additional costly, labor-intensive, secondary marking operations. With additional marking and support tooling, the Model 2640 machine can also mark square and round bar stock. This is particularly beneficial to fitting manufacturers who typically have tremendous variations in part sizes and types.

Fitting sizes, types, lot numbers, part numbers, company logos or trademarks, and even date codes can be roll marked on three or four sides of hexagonal stock.

The Model 2640, stand-alone, continuous roll marking machine, Fig. 1, consists of a heavy-duty machine tool base, two independent marking pressure rams, adjustable fixture and guide rolls with up to four marking rolls.

The marking rolls are driven by a 2 hp(1.49kW) DC electric motor through a variable speed drive that adjusts the bar stock feed rate from 70 to 210 fpm(21-64M/min). Bars from 3 to 20 feet (0.91-6.1M) long are manually fed into the machine. The driven marking rollers continuously mark the bar stock and drive the bars through the machine.

Brass, Fig. 2, stainless steel, alloy and CRS bar stock can be marked equally well in sizes from 3/8 to 2-1/2 inches (9.5 to 63.5 mm). Conveniently located hand wheels at the top of the machine provide easy adjustments on the imprint pressure and bar stock size. The motor control has fuses, a transformer and requires 220/240 VAC power.

CMT roll marking machines are designed to mark round, flat and irregular shaped parts quickly and quietly. Roll marking produces uniform impressions and uses low marking pressures compared to press applications.

Columbia Marking Tools is a leading designer and manufacturer of metal and plastic marking equipment including stamps, roll marking dies, roll marking and impact marking machines, fully programmable pulsed fiber diode laser, peen/scribe marking and UID/2D Square Dot® machines, numbering heads and special marking and vision inspection machines.

For more Information: www.columbiamt.com

Leave a Reply

Your email address will not be published. Required fields are marked *